12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control (White)

12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control (White)

Q: Not able to adjust the sensitivity, the alarm is always on. Any recommendations.

Yes I had the same problem. However as a electronic Tech. I could make a a slight change in the circuit to Rectify that. However I could not submit the cure For other than personal use. Call the company that made it. They might just replace it.

Q: Can this be wired to turn on a bildge pump instead of the siren?

In a bilge application and underway, you would need two of these to trigger the pump to turn on and off when the water has not gotten deep enough to require the bilge pump to turn on. I would put one low enough so that it stays submerged, signal lost if uncovered by water. Then when the higher sensor detected water a latching relay that is tripped would keep the pump running, use another relay for the pump, and when the lower sensor becomes uncovered the pump shuts off. You need two of the devices, you can have more than one sensor, I have 6 on each devices monitoring area.

Q: Using on a bilge pump. issue is once the bilge was pumped out any slight amount of water kicks the pump on and immediately off. do i need delay relay?

Use a back flow preventer in the pump output hose to keep water returning to the bilge which then restarts the pump after the pumps first shuts off.

Q: Will this detect cat urine? Cat will pee along a certain wall, want to hide 2 wires in the carpet edge, alarm scares cat and alert me

I would think that it would, I am using it for detecting spills in water stores that refill 5 gallon cooler bottles, and it works perfectly on the city water, however the Permeate, low TDS water has to have a really large contact area to trip the sensor. The long wires version should work the best. I even had to add some salt crystals near the sensor to get the product water to become conductive enough. My recommendation is to buy it, use your wires to try it, if it doesn't work return it becuase you did not use their sensors. Strip your wires and place them near each other and cover the whole length where the pee pools on the floor you need the liquid to conduct the signal.

4.5/5

Product ID: 554749887

Secure Transaction

Details

Connector Type
Wired
Contact Material
Silver
Contact Type
2NO 2NC
Current Rating
10 Amps
Mounting Type
Surface Mount

⚡12V DC power for seamless integration

🔄10A NC/NO relay output for versatile control

🔔80dB built-in buzzer for loud alerts

Frequently Bought Together

12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)

Floor Water Sensor for Flood and Leak Detection (6 ft)

Wired water sensor Relay dry contact signal output Water level sensor DC12V power water detector Applicable to the equipment room and base station

Description

💧 Stay dry, stay ahead — never miss a leak again!

INSTANT FLOOD ALERT - Detects leaks immediately to protect your home and assets
COMPACT LIGHTWEIGHT - Sleek 8.2 x 5 x 3.2 cm module fits discreetly anywhere
POWERFUL RELAY CONTROL - Supports up to 10A load to trigger sirens or shut-off valves effortlessly
PLUG PLAY WIRED SETUP - Easy surface mount design with reliable wired connection for professional-grade security
CUSTOMIZABLE SENSITIVITY - Adjust detection levels to avoid false alarms and ensure precision

The Tokatuker 12V DC Wired Water Leak Detector combines high-sensitivity water detection with a robust 10A relay output, enabling automatic alerts and control of external devices like sirens or shut-off valves. Featuring adjustable sensitivity and an 80dB buzzer, this compact, surface-mount sensor ensures reliable flood protection for homes and businesses.

Specifications

Connector Type	Wired
Contact Material	Silver
Contact Type	2NO 2NC
Current Rating	10 Amps
Mounting Type	Surface Mount
Brand	Tokatuker
Operation Mode	Automatic
Coil Voltage	12 Volts
Contact Current Rating	10 Amps
Maximum Switching Current	10 Amps
Maximum Switching Voltage	15 Volts
Minimum Switching Voltage	1E+1 Volts (DC)
Number of Terminals	2
UPC	750225419018
Manufacturer	Tokatuker
Product Dimensions	8.2 x 5 x 3.2 cm; 91 g
ASIN	B08WWXK2P7

Have a Question? See What Others Asked

Not able to adjust the sensitivity, the alarm is always on. Any recommendations.

Can this be wired to turn on a bildge pump instead of the siren?

Using on a bilge pump. issue is once the bilge was pumped out any slight amount of water kicks the pump on and immediately off. do i need delay relay?

Will this detect cat urine? Cat will pee along a certain wall, want to hide 2 wires in the carpet edge, alarm scares cat and alert me

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

VT22283

Duties & taxes incl.

Vanuatustore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ayesha M.

The product exactly matches the description. Very satisfied with my purchase.

5 days ago

Khalid Z.

Great experience from order to delivery. Highly recommended!

1 week ago

View all Trustpilot reviews