Kitchen Sink Pull Down Faucet Hose Replacement - 59-inch Nylon Hose, Black

This pull-down faucet replacement hose was a perfect fit for a Lowes 'Project Source' utility/ laundry tub Model 999-LUT24 (or 30). I had broken the plastic threaded sleeve at the faucet head attachment on the original. This one, at 10M, with the double o-ring, fit perfectly both at the quick-connector (behind the sink), and at the 1/2" thread faucet head. No leaks at install today. My sink is just like what Home Depot now carries as 'Glacier Bay' item 999-HUT24 (or 30). However, since small changes take place between models, confirm the shape of the connector end, and confirm the millimeters (10M) diameter. NOTE: Because of the faucet assembly design, I could not feed the new line directly through the curved faucet over the sink down through the assembly under the sink (it kept catching on an internal narrowing spot) so I sent the 10M end of the old hose up through the faucet from the back/ assembly, then taped the 10M end of the new one to the end of the old one (end-to-end), then carefully pulled it back through the faucet assembly and then removed the tape and connected the new one to the quick-connect. Hope that tip makes sense for anyone working with a similar situation.

Did the job and its more resistant than the one i replaced

Cheap, but works, too light compared to the original

Exact fit and looks better made than what it replaced. The original had a thin fitting that screwed onto the spray head, this one appears more substantial.

Perfect fit, better than orginal

I ordered this quite a while ago, installed it and it is still working the way it's supposed to. It passed the test of time.

The item came without the connector as shown in the picture. At that point I could no longer install it.

This was a replacement hose for my original faucet and it fits perfect. Very fast simple install.