LEONLITE3CCT LED Security Light Motion Sensor, Aluminum Flood Lights Outdoor, 3 Modes Motion Detector+Dusk to Dawn+Switch Control, 3000K/4000K/5000K Selectable, IP65, Adjustable 3-Head, ETL, Bronze

I use the motion sensing setting to illuminate my yard when my pup goes out. (I live in a rural area and there aren't street lights)The 3 lights have a wide coverage area and are adjustable. That adjustability was important to me so I could move the lights to cover the areas I want. I am very happy with this purchase. It's been dry so I can't address the weather resistance of the lights, yet.

We had 4 motion lights on the corners of our home. Each with 2 - 150 watt bulbs. When all 8 were on that's 1,200 watts being used. These lights were put in when we built 15 years ago and were a little flaky now, not always working like they should. So, I looked into LED motion lights and read about these. Reviews were good so I ordered 4 sets of 3 lights each. I turned off the breaker that was marked but checked the wiring with a volt meter to be sure. I strongly suggest you use a volt meter to check both black (hot) and white (neutral) to green (ground) to make sure there is no voltage. Breaker boxes can be labeled wrong and wiring can be "funny" sometimes. Anyway, Yesterday I took down one old light, put the cross bar in place and wired in the new light, mounted it and aimed the lights. Adjusted the sensitivity to max and backed off about 1/8", set the time to max and backed off about 1/8" inch.This got it real close to where I want it and I may tweak them later. Put up a second light set. Installed the other two lights today. It took me 2 days because I'm 64, have a heart condition and I have Lupus. If not for that they would have all gone up in one day. I don't move as fast as I used to. Each light is adjustable left & right and up & down. The sensor is adjustable only up & down. Tried to loosen the sensor so as to move it left & right but could not. So, I moved the whole lamp assembly to get it where I wanted the sensor to be, no real problem. If you flip the switch inside the house "off" for about 2 seconds and then "on" the lights come on and stay on. Repeat the "off and on" and they go back to automatic and will come on when they detect motion (actually moving heat). The 4 sets of motion lights are mounted on the soffit, not on the fascia board. These light are great! Very bright, covers a large area (especially with 3 LED lights) and sensitivity is good. Just what I needed.

I purchased this light because the brand received high reviews. Really like the design and compact size. The three directional LED lights are very bright.. Adjusting the right angle for the motion detector is extremely challenging. The motion detector distance is not more than 25 feet and there is too long a delay from detection and when lights come on. The detection field is far less than 180 degrees more like 30 degrees. I set the distance for detection at near maximum and to come on with motion detected. I have walked through the area undetected at times or the light comes on after we drive into garage. Perhaps ours is defective. May just go to the dusk to dawn setting. The motion sensing suddenly coming on is a deterrent we desired. Will keep adjusting angle etc to see if we can get better results.

I didn't know quite what to expect from a light that appears to have three single LEDs, in a warm white, and with no apparent means to reflect and direct the light that's cast.Will it be bright enough? What type of beam will there be, and how far is the throw? The good news is that the warmer color doesn't seem to affect the perceived light output. There's basically a flood pattern which, of course, can be modified to some degree by aiming the individual heads. I have a few trees between 10 and 25 feet away from the light which now cast their sparse shadows probably 100 feet from the light, into the yard beyond. I'd spent a lot of time and money investing in solar lighting, which outwardly seemed to be the easiest to implement in order to see what's what after dusk. The problem is, the output just isn't ever quite what you wanted. Nevermind that solar panels degrade and onboard batteries swell and experience reduced capacity over time. Conversely, wiring this light couldn't be more simple, provided you've found a suitable location or, in my case, a fixture to replace. It never is starved for power and it doesn't require replacement specifically due to the means by which it's powered. The build quality seems to be good, and the material used feels substantial. Over all, I consider it a good buy.

I never did get to try this light out- unfortunately it's not designed to work with a shallow (pancake) junction box. The wires that connect the three lights together on the back stick out quite a bit, and I suspect that even if I had managed to re-do the wires the long bolt that holds the light to the mounting strap would have hit the back of the box before it got tight. It's a shame manufacturers don't seem to think about installation issues like these and at least include photos of the backside of the light so buyers can make an informed decision!

Purchased 3 of these lights (2 double head and 1 triple head) to install on our back patio. Installation was pretty simple if you understand basic electrical work. Fixtures are a good quality and should last. Really like the ability to be able to adjust motion sensitivity, distance and time the light stays on. Good feature that you can change to on, if you want to have it stay on for an extended period, or dusk to dawn. Just purchased 3 more for other areas.

Item feels sturdy and well built. Small compact light fixture. The timer and sensitivity adjustments seem to work well. I like the "Warm white 3000K" color as it gives an incandescent light feel without the harsh 5k bright LED light of other lamps. lights lit up rear yard very well.Ordered these lights in Bronze color but was surprised to find the wall seal gasket is BRIGHT WHITE! It looked terrible on beige wall with the gasket clearly visible from anywhere in the Milky-Way galaxy. Removed gasket and sealed the light to the wall with beige putty tape.I would recommend these lights to others.