Model Number: SN-30-12 (DC 12V 30W 2.5A)

Features:
Isolation Class II
Protection: Short circuit,Overload,Over voltage
Cooling by free air convection
Can be installed on DIN rail TS-35/7.5 or 15
LED indicator for power on
100% full load burn-in test
2 years warranty

Input
Voltage Range: 200-240 VAC
Efficiency: 85%
Ac Current: 0.27A/230VAC
Inrush Current: Cold Start <20A at 230VAC

Output:
Voltage: 12VDC
Rated Current: 2.5A
Current Range: 0~2.5A
Rated Power: 30w
Ripple&Noise: 120mVp-p
Voltage Adj. Range: 10.8-13.6V
Hold UP Time: 100ms/230VAC
Set up, Rise time: 500ms, 20ms/ 230VAC

Protection
Over Current: 110-160% rated output power
Protection Type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage: Hiccup mode, recovers automatically after fault condition is removed

Environment
Working Temp & Humidity: -20-60°C 20-90% RH
Storage Temp & Humidity: -40-80°C 10-90%RH

Safety&EMC
Safety Standards: Design Refer to: EN60950
Withstand Voltage: I/P-O/P:3KVAC
Isolation Resistance: I/P-O/P:>100M Ohms / 500VDC
EMC Emission: Compliance to ENÌ55022 , EN61000-3-2 ,
EMC Immunity: Compliance to EN55024, EN61000-3-3,

Dimension: 63*93*56mm
Weight: 0.21kg

Package including 1 * SN-30-12 (with no DIN Rail)

NOTE:
Please see the installation manual in picture area carefully and installed by a professional technical man.
Please never exceed the maximum load Connection
Please do not connect the transformer with LED dimmer control, this power supply is without dimming function
Welcome to contact us if you have any questions during usage, thanks for your support!

Brand	Jiemeiyin
Manufacturer	Jiemeiyin
Product Dimensions	9.3 x 6.3 x 5.6 cm; 210 g
Manufacturer reference	SN-30-12
Part Number	SN-30-12
Area Lighting Classification	IP20
Voltage	12 Volts
Amperage Capacity	2.5 Amps
Switch Installation Type	din rail
Batteries included?	No
Batteries Required?	No
Certification	CE (EMC LVD）ROHS
EU Energy Efficiency Label	85%
Wattage	30 watts
Item Weight	210 g
Guaranteed software updates until	unknown

SN-30-12 Din-Rail Power Supply Driver Transformer AC 230V to DC 30W 12V 2.5Amp, for Led Tape, Led Strip, Security Systems and Doorbell Phone Intercom, Suitable for Building Automation and Control of Household Appliance

Description

Specifications

Common Questions