Dremel 290-01 0.2 Amp 7,200 Stroke Per Minute Engraver includes Letter and Number Template

Good but extra marking pin the box

purchase all 03 machine not working kindly take product & return our value money asap !

FAULTY PRODUCT! MOTOR GOT BURNT AS SOON AS IT WAS PLUGGED IN SOCKET FOR FIRST TIME.

Not good and input voltage is 120 V its not for india.

Product is not good ,it's get hot in few seconds,I returned it with in two days of receiving but after one month till now they did not refund my money,while the seller approved my refund.

Desde la primera vez que lo usé, me salieron bien las letras con la plantilla

وصل المنتج مفتوحا وهذا شيء غير جيد على العموم أنا راضٍ عن المنتج

Works as intended, I use it for engraving hand tools. I purchased separately the diamond point dremel engraving bit. Cuts better than the one included with this engraver (see my review). Lighter than dremel rotary tools, and smaller, though the plastic seems to be of the same or similar quality. Stroke per minute dial works as described, engraving depth can also be adjusted by the pressure you apply with the tool, the bit (like the diamond bit), and how many passes you do. Engraving small initials is easy, making decorative glass would be more challenging and would require more skill, but this is not what I use it for. After a few tests on some scrap to get the feel of it, I was ready to go. I was pleased with the results from the tool, but my handwriting, not so much. Tool worked well. Included stencil works if the tool is help perfectly vertical to the engraving surface. Though the way the letters are stenciled, there are large gaps due to the thickness and design of the stencil. For example a letter B looks more like 13. Sometimes I used the stencil and then filled in the gaps by hand. It's very similar to writing with a large, vibrating, noisy pencil. If you have a steady hand you could easily write someone a letter on a piece of sheet metal. It is rather noisy, especially on the higher settings, lots of buzzing and rattling but doesn't retract from the functionality. This isn't the sort of thing that requires stealth anyway. I had no problems with the set screw when changing bits. I was prepared with a small flat bladed pocket type screwdriver and know how not to strip a screw. Snug it up and you're done. If the bit comes loose (which mine hasn't) snug it down a little more. If you start perspiring, grunting, or shaking violently while tightening it down, ease up. It's a set screw, not the lug nuts on your spare tire. Good price, Dremel is a name brand, and bits can be purchased at most hardware stores. I was unable to find the diamond bits at my local hardware stores so I just orded it with the engraver from Amazon. Good tool

Works great

Good power, worked as spected.