









Features:The display switches on and off automatically when the vehicle starts or stops, effectively protecting the car battery, while still offering manual switch mode, and easier control of the HUD.Automatic and manual adjustment of the brightness, so you can drive without any glare.Technical specifications:Environmental temperature: -40℃ to 80℃.Barometric pressure:-86-106 kPa.Relative humidity:-10-95%.Surround sound: < = 60 dB.Alarm sound level: > = 30 dB (A).Working voltage:-9-16 V DC (12 V DC/400 mA).Product weight:-40 g/1.4 oz.Package size:-17 x 13 x 4.5 cm/6.7 x 5.1 x 1.8 inches.Package weight:-215 g/7.6 oz.Installation of the reflective film:First of all, please put the non-slip mat in front of the dashboard, then put the HUD on it.Next, please stick the reflective film on the windscreen.The reflective film should be glued just above the machine and it should be able to reflect the whole display.Package contents:1 x HUD.1 x OBDII connector.1 x non-slip mat.1 x user manual [English language not guaranteed].
P**T
So far not so good
I've install this in the car but I'm not sure if I can adjust it to work correctly. Very hard to get everything lined up so that the driver can see the display without looking up or down. When no sheet is fitted there is a nice clear image on the screen, but because car screens are laminated you get two images, but as soon as you fit the screen reflector to the glass the image is not as clear.It's also difficult to line things up, also cable comes out at the front car screen, would have been better coming out the car side and straight down to the socket.I've ordered a reflective holder and hope it fixes the problem.Next is the set up, once you manage to understand what's to do, it's easy there onwards.Not as good as I had hopedWatch this spaceUpdateIve now bought a reflective phone/hud holder, you place this device inside it and it has an angled mirror screen, Now I have fitted this inside that extra unit, the display is good, this device isnt much use with its plastic sheet, too small and visible outside and bad display.So if your buying this, first order that device that you can use this with ;"Universal Car HUD GPS Navigation HD Image Reflector" £12Now that you have both, im wondering why you would want to see the cars voltage, or engine temperature? perhaps you do? I don't, I bought it to see the speed, as the 60 isnt clear on my car. The setup is a bit confusing, but Im sure you will eventually figure it out, mins in MPH now, and a flick of the set switch you can switch off engine temperature and RPM leaving a nice clear MPH in the mirror display.It suppose to display other things? I think it did when turning engine off ? Well MPH is all I want, but does work out more expensive as the reflective plastic is of no use. A mirror would be ok?UpdateAdded photo of that hud holder without it this device is no good at allHelpful?Yes,NoThanks
A**R
Heads up Speedo and Tachometer
Great for seeing the digital speedo on the windscreenBecause you can’t speed the car speedo all the time.Battery voltage and engine temperature can also be displayed but not both at the same time. Revcounter is also handy having a alert buzzer.I’ll buy one again if I had two cars. .
P**E
Fun gift
Good little fun gift, took me awhile to find a setting that was accurate. Easy to install.
Trustpilot
1 day ago
2 months ago