ERYONE Ultra Silk PLA Filament, Silky Glossy Finish Filament, Fast Color Change Rainbow PLA 1.75mm,+/-0.03mm, 1kg(2.2LBS)/Spool, Twist Rainbow Vortex (Red Blue Green)

Amazing looking filament. Prints smoothly without an issue and barely any visible layer lines at thin layers. Love the colour gradient. This model produced a bit of stringing but that's to be expected. Quick blast from a heat gun and it came out perfect. Such good filament for the money would definitely buy again

Perfect filament! No issues, prints really nice! Quick colour changing. Well packaged!

The product purchased is Copper SILK PLA Filament 1.75 mm SHIPPING, PACKAGING AND PACKAGING: The product arrived within 18 hours of ordering, the Eryone branded filament box was contained inside a classic Amazon cardboard box. The filament is a silk PLA in copper colour, the product looks to be of a good quality. The flexibility of the filament is very good and has been perfectly preserved in its hermetic packaging with moisture absorbent. The filament, measured at several points, always measured 1.75mm. This PLA silk is characterized by a very glossy and smooth print compared to standard PLA filaments. IN USE: The quality of the filament is excellent, a really high grade, this makes printing quality shiny prints a joy. Loading the filament was easy with extrusion being very accurate and consistent. The machine I used for the printing is the Eryone ER20. First I printed a temperature calibration tower (with fan on the nozzle). According to the test I set the print temperature to 195. I then printed the classic Benchy without any problems and went on to print the Julia Vase #011 - Heatwave with a great finish. The material is perfect for this type of print! The results, as shown in the photos, are excellent and the quality of the filament is very high, the smoothness and polished effect makes the printing look very professional, with very little post production you can get beautiful results. CONCLUSIONS: The quality of the filament is very high, the silk PLA gives a fantastic finished print requiring little or no post processing, the colour and sheen is stunning. If your looking for a quality silk PLA 1.75mm then I recommend the Eryone product.

I was looking for a gold filament for a project so ordered this. The filament arrived seal packed with a small pouch of silica to avoid moister contamination, and seemed well packed and protected. I had no issues using the filament, and it ran through perfectly with no tangles or snags. The filament is in my opinion very brittle so you may well have issues with anything using a lot of high or thin support areas. The finish of the filament is very clean and I managed to get some really smooth prints from it. The colour shown is a very good match for the finished print. It didn’t quite match the gold colour I was after for my project but that was my fault in colour choice, not the filament which is more on the lighter yellow gold side, and as I say the pictures are a good match for the colour. Overall a good smooth filament that produced some nice clean prints, it is quite brittle so in my opinion not suitable for projects with a lot of support.

I needed a multi-coloured PLA - and this one looked good and when printed the material looks good - but I would not buy this again - it is trouble - it is very very delicate with getting the settings correct for it - but impossible to do any large-ish print with it - it is either kinked on the roll or automatically kinks coming off the roll and then it jams in the extruder - no matter what machine I use or anything - I had to hand-feed it into the extruder and yes it appeared to come off the roll with kinks which will jam the extruder - I had to cut out and join to remove the kinks. I changed to a different manufacturer - problem completely gone …. Sorry…. Maybe I got a bad roll ?

Purchased reluctantly after having issues with other brands silk PLA and i must say i was pleasantly surprised. This printed like a dream and although slightly more brittle (as expected) than normal PLA it was still quite tough, also compared to other brands i have used this produced very little stringing. I am V impressed and will be purchasing other colours in this brand. The colour was perfect too (i used it for an Iron man helmet).

beautiful golden color and print nice.

Ottimo filamento, come tutti do eryone. Ma la linea silk ha una marcia in più.

Ich habe schon einige Rainbow-Filamente ausprobiert, aber dieses hier von ERYONE sticht wirklich heraus – der Glanz ist beeindruckend und der Farbverlauf kommt extrem lebendig rüber. Die Farben wechseln schnell genug, sodass man selbst bei kleineren Modellen deutlich mehrere Töne sieht, was bei vielen anderen Filamenten nicht der Fall ist. Der Druck lief absolut problemlos. Die Maßhaltigkeit liegt sehr stabil bei ±0,03 mm und ich hatte keinerlei Probleme mit Verstopfungen oder schlechter Layerhaftung. Das Filament ließ sich direkt ohne große Anpassungen auf meinem Standard-PLA-Profil drucken. Auch die Oberflächenqualität ist top – die Teile sehen fast aus wie poliert. Was mir besonders gefällt, ist der „Ultra Shiny“-Effekt. Das Filament hat diesen seidigen Glanz, der vor allem bei dekorativen Objekten richtig was hermacht. Ich habe eine Vase und einige Schriftzüge gedruckt, die sehen aus, als wären sie aus lackiertem Kunststoff. Natürlich ist der schnelle Farbverlauf Geschmackssache – wer sehr gezielt bestimmte Farbbereiche einsetzen will, muss etwas experimentieren. Aber für kreative, auffällige Modelle oder Geschenke ist dieses Filament ideal. Ich bin absolut zufrieden und werde es definitiv wieder bestellen.

Ottimo filamento

Ho da poco iniziato con le stampe 3D e usando diversi filamenti sono arrivato alla conclusione di utilizzare PLA per le prototipazioni dei modelli da stampare. Arriva ben imballato, la bobina di filamento e sottovuoto sigillata e riposta in una scatola di cartone. Il filamento è ben arrotolato e già a prima vista mi era sembrato di buona qualità. Ho scelto il colore Argento perché mi piace e avevo un mente di fare delle stampe con quel colore. Da subito ho iniziato a provarlo con dei modellini. Sin dalla prima stampa ero soddisfatto della qualità e successivamente con i dovuti settaggi ho ottenuto stampe ancora migliori. Ho impostato la temperatura del nozzle a 200°C per ottenere un risultato ottimale. Non conoscevo questo marchio prima ma data l'esperienza positiva con questo prodotto sono sicuro che in futuro ne prendo altri colori dello stesso marchio. Ora che l'ho provato lo consiglio a chi chiunque vuole ottenere ottime stampe con colori particolari.