GoldenSunny 73.1mm OD to 57.1mm ID Hub Centric Rings, Silver Aluminum Hubcentric Rings for 57.1 Vehicle Hubs with 73.1 Wheel Center Bore, Pack of 4

Tight fit, tapped in with a rubber mallet. Exactly what I wanted! Q7 wheels on an Atlas and smoother drive than ever before

I put these on a set of 19x8.5 Verde wheels on my 2016 VW GTI that had 18in wheels from the factory, these rings eliminated ALL of the vibrations I was getting AND is overall much safer to have on your car, keeps hub-centric wheels from going to lug-centric. I've only had them on for a few weeks but so far they are amazing, installation took less than 5 minutes per wheel, all you do jack the car up (use stands, please) take the wheel off, pop the ring on the bore of the WHEEL (NOT the hub) and put it back on! They should drop right in with little to no force so you will know if it's going in the right place.

My aftermarket wheels kept vibrating at high speed despite multiple balancing attempts. I read on the internet that hub centric rings are required, but I already had a set of used plastic rings on there. I wasn't sure about using aluminum rings due to other people's stories of seized rings. I decided to take a risk and got these aluminum rings. I applied a lot of aluminum based anti-seize to the ring and wheel bore. Vibration is now 100% gone, rides like OEM stock wheels. Crossing my fingers for when I swap my winter wheels in Nov... I hope these rings will be easy to remove with all the anti-seize

Fit really well. Used to fit rays wheels on a mk7 Volkswagen

Funciona perfectamente Volkswagen jetta

Perfect fit!!....... Tight in the wheels and perfect fit on the wheel hub......... When I bought the Audi wheels I didn't realize Audi had both 57.1 & 66.5 hub ID's.......... I think A3 is VW 57.1........ A4 66.5....... The bolt pattern is is same 5x112, but without the concentric rings and just using the bolts, the wheels are off center maybe up to a 1/16 (.062) and give the car a tire out of balance feeling, especially over 60mph...... These concentric rings fit the issues perfectly........... I can't believe in all the VW / Audi forum I read as to wheel interchange (Most address offset) I never read about this issue!!!...... As I initially mounted the Audi wheels I knew it didn't seem correct!!........ I didn't think this topic is still really address!!!

well made and consistent

Great price but 2 of the rings were not lathe at the same ID as the other 2 and had to alter them to make them fit