Fibre Glast Econostitch Peel Ply, 3 Yards – for Easy, Uniform, Strong Surfaces in Hand Layups of Air, Auto & Boat Repairs, Builds, Castings & Parts – Epoxy, Resin & Gel Coat Compatible – Made in USA

We used this peel ply on a large fiberglass project on our sailboat. The product worked exactly as it should; it is very satisfying to pull the peel ply off the set up fiberglass. This product saved us hours of extra prep time between the many days of fiberglassing. We purchased it multiple times and it was a consistent product each time. We would definitely recommend this product for any fiberglass project!

Better that the cheap all blue type

Cheap and works. This is not the easiest to release if you're in a tight spot or pulling up flow media. Their nylon peel ply releases much easier, but you have to pay triple.

It leaves a keyed surface so no need for sanding, peels off easily and removes amine blush from epoxy with no need to wash.

As requested, shipped promptly. So much better on a roll. Will never buy from those who fold peelply as the creases, where folded, always cause problems.

Just becasuse it leaves a nice surface does not automatically make the user good at resin/fiberglass work. If high spots need to be sanded down, those sanded surfaces will not match the fabric texture. If you're good, this will make you better. Also, I wanted to make some light weight tape out of this product, that would stay imbedded in the resin like fiberglass. However, I could not find any info on how strong it is for an "off-label" use like this, so I didn't use it that way.

Applied easily over fresh fiberglass and resin. Provided a smooth surface requiring less sanding of the resin after removed.

Purchased for future projects