WORKPRO 43PC Laminate Flooring Installation Kit- Rubber Mallet with Fiberglass Handle, 17” Heavy Duty Pull and Pry Bar, Solid Tapping Block and 40 Spacers- Premium Wood Flooring Installation Tool

This Laminate Wood Flooring Installation Kit is excellent! It has everything you need to get started, from spacers to tapping blocks and pull bars, making the installation process smooth and efficient. The tools feel durable and well-made, not cheap or flimsy at all. Using this kit made laying my laminate flooring so much easier and more precise. It helped me achieve tight seams and a professional-looking finish without any frustration. Even if you’re a DIY beginner, the kit makes the process much more manageable. For anyone installing laminate flooring, this kit is a must-have. It’s practical, reliable, and really takes the stress out of installation. Highly recommend!

Nice kit. Worth the price. Shipped fast. Durability is great holds up well even after 2000 sq ft of floor . Light weight. Size makes it easy to work with. Only complaint is Wall spacer need to be taped don’t stay by themselves felt they are a bit o the cheap side . Bought a couple packs from home***o that were great made the job go fast. Over all a great kid for the price. Would recommend for diy .

This toolset is not bad for a beginner like me to use for putting down LVT. The rubber mallet feels great in your hand and works excellent to pop the floor into the joint. The metal pull bar works great but is a little on the thicker side if you're in a super tight spot it can be hard to fit but leaving a gap it works fantastic. The spacers are handy but i opted to not use them with my setup since I needed to adjust the floors course so it would be even on both sides of my room (OCD kicked in with this one haha) so I needed to have a 1.5" width on my course at both sides of the room to make it completely even with the room. My only slight complaint and I only am taking 1 star out of it because it might work better for thicker flooring than the 20mil flooring I installed, but the tapping block was impossible for me to use. I ended up just locking most courses in by hand or using a slight tap with a scrap piece on the end inside the tongue/groove and the rubber mallet to tap the course in and get it to lock in place. The tapping block is too light and lacks a handle to help you slide it on the tile. What I did get the tapping block to help with was to use a scrap piece of floor inside the groove and tap the block on the flat cut end of the flooring to tap it in.

I got this set to help with putting in my flooring and was Not disappointed. All itemwork as intended and I like that the little wedges are notched. It help with keeping the spacing I needed between the wall and the flooring. I am very glad I made this purchase.

Good little tool.

Did the job and I was happy to have it! Definitely not top of the line but it was worth it

This set works pretty well, but the pull bar bent on me and I had to straighten it out a couple of times. (You're right - I shouldn't have been hitting it that hard, but I had a couple of tough spots in the floor.) The bar has a couple of felt pads but IMHO not enough. I put the two pads under the end that catches the plank, and added another big one at the hammer end. MAKE SURE YOU ADD ENOUGH to protect your planks. The other parts are decent. The plastic tapping block is hard enough to damage the wood if you get too aggressive. (Better to use pull straps for the problem planks and resist hitting them.) I found the shims almost worthless as they are too thin for most applications. I needed a 1/4" perimeter gap, so I bought other, adjustable spacers that worked great. The hammer is a nice touch, and the two head give you some choices. I used the rubber side exclusively.

Don't spend $1000 on a floor and then skimp on the installation tools. Get these. It makes the install 100% easier. I did the first room without these and I was down to my last nerve especially when finishing a row or end of a room. These make it so much easier to get and keep tight seams.