Tech Armor HD Clear Film Screen Protector Designed for Apple NEW iPad Pro 11-inch 2021, 2020, 2018 and iPad Air 5 (2022), iPad Air 4 (2020) - 2 Pack

I don't understand why this product has a low number of reviews and 4 stars rating only. I think the company should suggest 'the hinge' method for the application of this large protector. Otherwise, they cannot advertise this awesome protector.I did not watch the application video. I used 'the hinge method' to apply which took a few minutes without any bubbles or dust etc.I am using the Ipad Pro for note-taking and I have tried with a glass protector and without any protector. With glass protectors, you definitely lose sensitivity and added thickness affects the Apple pencil. Also, compared to the screen without a protector, the glass protectors are way more slippery to write on. If you have a case, you don't even need the extra protection that comes with tempered glass.This one is not that slippery and has similar to the slipperiness of the original screen which makes note-taking a lot easier. And I don't think it smudges a lot. It may smudge more compared to the glass but the original screen without protector smudges way more which is also harder to clean.

I was a little apprehensive about applying the screen protectors to the iPad Pro after reading the reviews. I watched the video and didn’t encounter any problems. I think it’s key to have a perfectly clean screen and take your time. I had two iPads done in a half hour.As far as anti glare and anti smudge, I took my iPad on the deck and was in the sun, there was a glare and I could see smudge marks. I marked it down 1 star on each of these categories. Inside there is no problem. I’m pleased with my purchase and would purchase again.

You almost need a NASA clean room to put it on.. Probably turn off your heater or A/C as ANY thing in the air will get in the way. Simply put it’s a “Production” to install, aligning the edges, then realigning the edges, then noting ALL the bubbles to get rid of and then find not all of them are really bubbles... 😦 it’s a bit of a “hair puller”, that’s probably why u get 2 sheets in the package as you’ll probably need the second one. There’s a fair amount of reflection as it’s clear and very shiny. I have to say though, the product once installed is tough as nails, ya almost can’t hurt it. I’ve stuck with these people as their product is the best, just hard (for me) to install..

At first I was upset because I ordered the wrong covers. I meant to order the matte protectors. That was my error. But what left me disappointed was the challenge of installation. Good thing it was a two pack because they where a pain to get on straight and no matter what I did lint and dust still ended up under the protector. I tossed the first one hoping the second time would be the charm. But it was just as poor. Maybe it was human error but I wouldn’t buy again to test it.

I bought this protective film to make sure I had full access to the touch sensitivity of my new iPad, and it is perfect. There is no difference in sensitivity so I can do my digital art uninterrupted, it covers the screen nearly from end-to-end, and installation was relatively easy with no bubbles (although the listed install link on the packaging didn't work, but I was able to navigate the webpage myself and figure it out).

Amazing product. No bubbles or defects at all. Took 5-10min to install. Works seamlessly with the pencil.

As of day one, it works well with Face ID and Apple Pencil, but I’ll still need a few more days to confirm.However the installation is a total pain in the ass because it’s an iPad so the screen is huge and nothing is included in the package to help you secure the screen protector in place like some other brands do. Because of this I messed up the first screen protector and it’s now in the garbage.EDIT: it’s been about a month now, Face ID works perfectly, screen touch works perfectly but this thing is a fingerprint magnet. for me that’s not a problem as it’s only noticeable on black backgrounds. HOWEVER what’s not fine is how easily this thing gets scratched and smudged with the Apple Pencil. It could damage the pencil tip. For that I’m changing my review from 4 stars to 2 stars.

The best clear pet protector for iPad. I had a hard time aligning it until I used the hinge method and that ended up working and once on I had to iron out the bubbles and there were a couple that I couldn’t get out but after 4 hours they went away on their own. I was very surprised that they did because that’s always the issue with a plastic protector.

I bought this to use as a screen protector on my ELEGOO Saturn 3D Printer, and it works PERFECTLY. I had a surprisingly hard time finding non-matte, and non tempered glass protectors. This is ideal because i was able to trim it to fit around the resin vat, and used some kapton tape to ensure that nothing can get under the edges.I have used this now on several prints and have not had to adjust exposure times at all to compensate (using 25s base and 2.5 standard exposure for both Elegoo ABS like and Anycubic resin)If I ever need another, I will order this again.

Excelente

Der Artikel kam schnell an, war gut verpackt. Dennoch hatte ich Schwierigkeiten mit dem Aufbringen auf dem Display des neuen IPads, da die Folie schon sehr dünn ist. So habe ich die erste gleich wieder abmachen müssen. Es blieben trotz aller Sorgfalt einige Luftbläschen drin. Also nur etwas für Profis, für die anderen empfehle ich dickere Folien.

Really the manual carefully before you install; it might safe you lots troubles.I peal off the second sticker not the second screen; it left glue on the screen, I used soap and all kind of method to wash it; then I read the manual, found out I need to peak off the second screen; WTF! After I pealed off the second screen, it looks perfect. Writing and drawing feel so good.I can’t believe the price is so friendly.I found this screen protector from an Art Youtuber he kept saying this company is not his sponsor. He is so honest, it is sooo good!!!!

I know that the ad clearly advises that it is not a tempered glass screen protector. But, by the time of purchase, I did not foresee the downside of non-tempered glass scree protector. First of all, it gets dust and finger print very quickly and easily. The worse thing is that unlike tempered glass protectors, though I wipe finger prints, they still remain on the screen. Second, (actually this is the main reason I do not recommend this product to others) I could not be able to enjoy the 120Hz of screen refresh rate because the screen protector is not smooth as matte or glassy protectors. The 120Hz screen refresh rate is one of the most important benefits you can enjoy with your iPad pro 3rd gen. However, my fingers cannot move around the screen freely because of the lack of the smoothness of the protector. I would rather recommend you to buy a tempered-glass one if you do not use your iPad for note taking, or to get a matte scree protector if you do a lot of note taking works with your iPad.