03723 9 ft. Black Rubber Garage Door Bottom Seal

This seal is 100% rubber, not plastic, so it conforms well to the space under the door. It is just the right thickness to give a stiffness so it doesn't feel flimsy, yet it can be easily handled for installation. The nails have a spiral along the shaft so they won't pull out as easily as smooth nails. The plastic "washers' have a large diameter that will keep the nails from tearing the seal. To cut the rubber seal to fit the door, a sharp pair of scissors works great. Installation can be done alone, but it goes more smoothly with two. Will know more in the winter if snow or ice will stick the seal to the cement, but the rubber's flexibility seems like it will keep that from happening. If this is not the case, I will update this post. The seal looks great on the door, making it look more finished, and we have already noticed it doesn't feel drafty in the garage anymore. We had a 1/8" gap below the door and this seal closes it perfectly. Our door is an "old fashioned" heavy manual lift type, and this seal also acts as a bumper to cushion the door when closing it, helping to protect the windowpanes. This seal is an excellent investment, will protect the door, and keep debris and animals out, and snow from blowing in. You will be pleased with this very high-quality garage door seal!

This garage door seal is very simple and quite effective. The seal is high quality with virtually no water retention. You will have to have your door in a partially open position to attach the strip. The product installs easily and comes with the required nails and they include plastic washers to increase the holding area. I had to purchase the 16 foot long sealer since they did not advertise a 10 foot long strip that I needed. The strip provides a very thorough seal should have a reasonably long life in outdoor conditions. I would purchase this again.

It was a fairly straightforward installation, took around 30 minutes to do but one issue we ran into was the tube inside just wouldn’t expand. It was kind of difficult getting it to a tube shape from the flat shape that it comes as.

well made but stiffer than the OEM seal

Worked out great for my garage bottom door seal. It keeps the water and cold out from coming into my home.

PROS: The price is VERY cheap & is actually pretty wide (other reviews complained about this) CONS: IF you actually use this as your only weather strip for the bottom of your garage door it provides little to no depth, thus water, wind, dirt, bugs and critters will still get in. Unless your garage floor is extremely level and your garage door is closed with downward & sustained force (not likely) there will be gaps. The strip is made of a rubber "like" material that has an almost spongy feel to it. The supplied nails do NOT look like the picture, they include a black plastic type washer, because the nails along would rip through the rubber "like strip. NOTE that almost ALL garage door bottoms are metal these days - so the nail are useless. I bought this NOT as a replacement for my current weather strip, but in the hopes of using a little of it as a CHEAP patch. I have a two car garage with a single door. On both ends there is a couple inch gap where my weather strip is short. It has been that way since I bought the house from the previous owner. I live in Florida & the other day I heard my wife yell - a snake was in our garage! Snakes are ALL around in Florida, this like most was a harmless garter snake but still not something you want to see - even in a garage. So as a quick/cheap fix I bought this. I cut this to length of my gap & tried attaching it to the bottom of the door. There was already on screw in the area I needed to patch so I started with that. I quickly learned that I needed a washer because my first attempt ripped right through the strip. My next problem was that I had to drill a starter hole in the bottom of the metal door plate which is quite thick. My 18V battery operated drill (or maybe the little drill bit I had on the end of it) were NOT up to the task. After 5 plus minutes of drilling with considerable pressure I barely put a mark in the door. The next idea I had was to somehow glue the piece on the door bottom. I tried just about everything. Double sided heavy duty mounting tape, a whole tube of Crazy Glue and even Mighty Putty which you are suppose to be able to use on rubber. Absolutely NOTHING will stick to this rubber "like" strip. So I ended up just cutting 3 piece on each end to length, stacked them on top of each other, sate them on the floor where the gap was & closed the door. On Monday I will just call in a garage door company and have them replace the whole thing. I would have rated it lower except it is a good price & may work for a select FEW people.

Easy to install, perfect size, sealability to keep water and wind out of your garage, Very Durabile and the adhesive is good to keep it in place. value at this price, highly recommend

Works not as well as I thought it would

Excellent product! Easy to install and great quality too.

I'm very pleased with this garage door seal. I've had it on my garage doors over the past winter. It was easy to cut, trim and install. It's in great condition and provides an excellent seal. The material used is different from the previous seal, which was rubber - this one is a heavier duty foam. Despite that, it seems to have quickly flexed and provides a softer close and better weatherstripping.

pour une porte de garage basculante c'est parfait sauf les clous!!! Je me suis servi des rondelles plastiques que j'ai fixées avec de vis à tôle inox.

This garage rubber door seal replaced an identical M-d seal which lasted 20 years. It was delivered ahead of the expected date slot for which thanks to the UK franchise handling this. It is made in Oklahoma USA from resilient rubber. It is easily installed and affords a good seal at the bottom of my garage door.

Good item