Fibre Glass-Evercoat Rage Ultra Xtra Sanding Body Filler, 0.8 Gallon (FIB-144)

The product is great. Learning curve on adding enough hardener having been used to bondo. I haven't had a 40 minute work window and only lost half of one batch to hardening. I'm mixing smaller batches and usually have about 10-15 minutes in the Florida heat. It's enough. It does sand very well. Order at least 2 weeks before you need it because the shipping took a long time.

I use this all the time something's either wrong with the mix or the hardener will not let me return and open can so I am at 130 bucks ever coat will not back up their product as well only the seller can give you exchange or return per evercoat buyer beware I am out 130 bucks TDS was followed to the T....

works great

I've been doing auto body repair for forty-five years and wish I would have had access to filler like this a long time ago. This stuff is easy to spread and gives you much more time to spread it. It sands easily with 80 grit sandpaper and finishes very smooth with 120-150 grit. As I found out the filler needs to be a mint green in color after being mixed with the hardener. The first batch I mixed was more yellow in color and it never fully set up, so make sure you use the recommended amount of hardener. You will also have to wait longer to sand the filler because it is slow setting. If you have a lot of filling to do then I would definitely recommend this filler. It saves time in the long run because you are not stopping and mixing more filler every ten minutes.

The product is excellent for finishing body work. I also want to recognize the vendor for quick response in replacing product that was damaged in shipping. They are excellent!

Product arrived in the box damaged. It was crushed and product was all over the box containing the can.

Works good for large panels or floating the whole car. Works much better in warmer weather. Takes a few hours to dry when not mixed with rage ultra.

Product works great!