4Pack 5052 H32 Thin Aluminum Sheet Metal 6 x 12 x 0.012" (12Mil) Aluminum Plate Covered with Protective Film, Rectangle 0.3MM Thin Aluminum Metal Plate for Crafting, DIY, Handcraft, Backsplashes

Description

Why choose us? - High quality and product retroactivity reliable and improving competitiveness - The surface is smooth and flatness is high, the naked eye can not see the inside of the factory through a variety of instruments strictly tested, such as direct reading spectrometer, ultrasonic flaw detector, hydrogen detector, cross section scanner, scanning electron microscope. - High plasticity and corrosion resistance, cannot be strengthened by heat treatment, good plasticity during semi-cold work hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, and can be polished. - Uses are mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil pipes, various liquid containers and other small-load parts made by deep drawing: Wire is used to make rivets. - 5052 H32 used in decoration, packaging, construction, transportation, electronics, aerospace, bus body, scaffolding, power transmission tower, furniture, ship equipment and hardware, etc. Specification: - Name: Aluminum Sheet & Plate - Color: Silver - Model: 5052 H32 - Tensile strength (σb): 170～305MPa - Conditional yield strength σ0.2 (MPa)≥90 - Elastic modulus (E): 69.3～70.7Gpa - The annealing temperature is: 345°C. - Package lncludes: 4Pack 6 in Width x 12 in Length x 0.012 in (thick) 5052 Chemical composition list: Aluminum Al: margin Silicon Si: ≤0.25 Copper Cu: ≤0.10 Magnesium Mg: 2.2~2.8 Zinc Zn: ≤0.10 Manganese Mn: ≤0.10 Chromium Cr: 0.15～0.35 Iron Fe: ≤0.40 Note: Single: ≤0.05; Total: ≤0.15 Note: - Since the product is very thin, its flatness cannot be guaranteed - If you have any questions about our aluminum sheet metal set, please feel free to contact us.